Wavlink Extender Not Working? Here’s The Solution!
Installing Wavlink extenders to improve the WiFi coverage of the existing networking device has become a common practice these days. However, there exists a percentage of users who are unable to make the most of their home networks even after installing range extenders. They complain about their Wavlink extender not working.
Given in this write-up are the tips that can help you return your WiFi range extender to its normal working state. However, before proceeding further, you are suggested to check the status of the power being supplied to the extender. So, have a look at the wall socket into which your Wavlink extender is plugged. Is it non-damaged? In case it is not, you must plug your WiFi extender into another wall outlet.
If everything is fine with the wall socket, there is a possibility that the power supply is fluctuating from the backend. In that case, you can consider using a UPS to power up your range extender.
Solutions: Wavlink Extender Not Working
1) Power Cycle the Extender
You should power cycle or reboot your range extender in case there is no issue with the power. This is to inform you that power cycling helps in eliminating technical glitches and helps to fix issues like ap.setup not working. Chances are that it will work in this case too. Power cycling of the extender means powering it off and turning it on after some time. Here are the steps that you are required to follow to power cycle your range extender properly:
- Switch off your Wavlink extender.
- Disconnect any cables connected to it.
- Keep the extender idle for 20-30 minutes.
- Re-connect the cables to your extender.
- Switch on the range extender.
As soon as your extender gets power cycled, check whether the problem has been fixed or not. In case it is still there, follow the next tip in line.
2) Check the Extender-Router Connection
When the extender-router connection is improper then also you can struggle with the Wavlink extender not working issue. Therefore, you must pay attention to the connection between your range extender and router.
Wireless Connection: If you have connected your range extender and router wirelessly, then the distance between them is supposed to be optimal. If it is too much, then both devices will struggle to communicate. On the other hand, if it is too less, there are chances that the signals emitted by them will get involved in a clash. Therefore, maintain an optimal gap between both devices.
Wired Connection: If your extender is connected to the router with the help of a LAN cable, then examine the entire length of the cable. Any cuts found? No? Then, ensure that the cable is properly connected to the correct ports of your networking devices. Just in case, the cable is found damaged from any point, consider replacing it with a new one to get the problem resolved.
3) Update the Firmware
Sometimes, it is outdated firmware due to which the Wavlink WiFi extender doesn’t work properly. Therefore, we suggest you upgrade your range extender right away. For this, you are required to access the default IP address by following the steps given below:
- Connect your computer to the Wavlink WiFi range extender network.
- Open a web browser and input the default IP into the address bar.
- Press Enter and log in to the extender using the correct admin password.
- Click the Firmware Update option.
- The next window will ask you to upload the extender’s firmware update file.
- So, open a new tab and download the extender’s firmware file from the Wavlink download center.
- Return to the firmware update tab and upload the file you’ve just downloaded.
- Wait for the firmware update to get completed.
The Final Thought
Wavlink is known for manufacturing various devices that help to enhance users’ internet experience. Be they Wavlink drivers or WiFi routers, users are satisfied with the outputs delivered by them. However, people having range extenders installed in their houses often face problems due to their carelessness. Now, we are wrapping up the guide focusing on the tips to fix the Wavlink extender not working issue. We hope that with the help of the techniques shared above, you will be able to make your extender functional.