192.168.10.1 IP Address: How to Access It for Wavlink Extender?
Digitization has painted the canvas of human life beautifully. Now, people don’t need to send a messenger to deliver their messages. It is possible with a single tap. Apart from this, users can watch their favorite shows and listen to music albums just because of the internet. And, when it comes to the role of Wavlink extenders in bringing the dawn of digitization, it is praiseworthy. Internet dead zones won’t remain dead anymore after doing the Wavlink extender setup. Users can access the settings of the extender either via wifi.wavlink.com or ap.setup. But, what they don’t know is that the Wavlink extender can also be managed using the 192.168.10.1 IP address.
If you are also unfamiliar with the same fact, this post will be of some help to you. Here, we will provide you with step-by-step guidelines to access a Wavlink WiFi extender using 192.168.10.1. Before getting started, let’s shed light on the prerequisites to access the 192.168.10.1 IP address in order to manage the Wavlink extender.
Prerequisites to Access 192.168.10.1 IP address
- An Ethernet cable with higher transfer speeds
- A power socket offering adequate electricity
- An already configured router or AP
- A secure web browser
- Your Wavlink extender
Once you get a hold of the things mentioned above, you can start the process of accessing the Wavlink WiFi extender using the 192.168.10.1 IP address. Here’s how.
Steps to Access 192.168.10.1 IP address
1. Power Up the Extender
Let’s commence the process of accessing the 192.168.10.1 IP address by powering up your Wavlink WiFi extender. For this, connect the extender to the power socket. Make sure that the connection is secure. Once ensured, set the Power button on your range extender to the ON position.
2. Connect Wavlink Extender to Router (AP)
The next step says to create a connection between the Wavlink range extender and the host router (AP). No matter how faster Gigabit speeds your Ethernet cable offers, you won’t get success in accessing the 192.168.10.1 IP address if the cable is damaged. FYI, the signal transmission gets disturbed due to external noise when there are cuts on the Ethernet cable or the connection is loose. Thus, you need to pay special attention while connecting your WiFi devices.
3. Open a Web Browser
Now, get access to a computer and switch it on. Ensure that it is free of viruses. Once your computer is ready for use, open a web browser. The web browser must not be obsolete and free of cache, cookies, and browsing history. If the browser you are using does not meet these requirements, then navigate to the Settings section and complete these requirements.
4. Type 192.168.10.1 IP Address
Move the cursor to the location (address bar) of the internet browser. Enter 192.168.10.1 IP address. Ensure not to commit typos while making the IP address entree. Press the Enter key once you are done typing and verifying the IP address. The moment you press Enter, the admin page of your Wavlink WiFi extender will appear. Do not consider using the search box to access 192.168.10.1 IP. If you do so, you will get numerous results, but not the gateway to reach the Wavlink extender’s settings.
And, with that, you have successfully accessed the 192.168.10.1 IP address. But, that’s not enough to manage the Wavlink extender. You have to complete the most crucial step to gain access to the extender’s settings i.e. Wavlink WiFi extender login. For this, you need to type the default Wavlink extender password into the required field and click Login. This action will open up the Wavlink WiFi extender setup wizard. Now, tweak the settings of your Wavlink extender the way you wish..
Need More Help?
Our post guiding the process of accessing the 192.168.10.1 IP address for the Wavlink extender has now reached its end. We hope that you will get success in accessing the Wavlink extender’s dashboard with the help of the steps outlined above. In case you don’t know how to manage your Wavlink extender, contact our experts immediately.