Wavlink Router Blinking Red [What Can Be Done to Fix It]
Like many other product lines, Wavlink also rolls out wireless routers every now and then. As compared to other brands, Wavlink provides cost-friendly routers. This has compelled many users in need of a fast internet connection to purchase a Wavlink wireless router. However, if 100 people have bought these routers, then 85 of them are facing the Wavlink router blinking red issue. In case you too are experiencing it, then it could be due to not one, not two, but many more factors.
What Caused Wavlink Router Blinking Red Issue?
This section has laid emphasis on the several reasons that have forced the LED lights on your networking device to blink red:
Power LED Light
- The wall socket to which the router is connected is short-circuited.
- In case your router came with a power cable, then it could be damaged.
Internet LED Light
- Proper signal transmission is not there between devices due to too much space.
- Bluetooth speakers and other electronic devices are causing signal interference.
Now, you may read the troubleshooting tips mentioned in this post and learn how to fix the Wavlink router blinking red issue in a matter of minutes.
How to Fix Wavlink Router Blinking Red Issue?
1st Case: Power LED Light
Get the Wall Socket Fixed
While doing Wavlink setup, did you not check the condition of the wall socket in which you are plugging your device? No? Well then, this means that you could have mistakenly connected your router to a damaged wall socket. In this case, you should call up electrician and ask him to fix the wall socket so that you can fix the issue in debate.
Replace the Power Cable
In case you are still a victim of the Wavlink router blinking red issue, then you ought to check the power cable in use. This solution is only applicable to those users who are using one of the older models. Replacing the power cable is recommended. In case, this does not work, you may switch to a router with an adapter.
2nd Case: Internet LED Light
Bring the Devices Closer
Have a clear look at the distance separating your devices. Here, we are specifically talking about the router and the modem. In case it is more than required, then you should think twice before reducing it. But, at the same time, ensure that it is less than needed. Or else, a collision of signals will occur, and fixing the router red light issue will remain a dream.
Relocate the WiFi Router
Another thing that can be done from your end to stop the internet LED light from blinking red is to change the location of your router. When you do so, ensure that it is not being kept near mirrors, fish tanks, cordless phones, washing machines, baby monitors, treadmills, televisions, microwave ovens, aluminum studs, and refrigerators.
Will Wavlink Router Reset Help?
In case nothing helped you, then you might be wondering why will now. Well, resetting the Wavlink WiFi router to the default mode is what will. To go about the process, you ought to hit the reset button on the Wavlink device and wait for it to give itself a new start. Avoid turning off the router while this is taking place. You might face issues or else.
Once done, read the steps given in the user manual and learn how to set it up from the very beginning. For your information, if you own a Wavlink extender, then know that you can also gain knowledge about ap.setup from its respective user manual.Can’t put your faith in this? Have a look right away and see if what is being said is indeed true or not.
This ends the troubleshooting blog post based completely on resolving the Wavlink router blinking red issue. Assuming that you have now successfully converted the blinking of the LED light from red to green, do not shy away from joining your computer or laptop to the WiFi and surfing the web in peace. Also, you do not have to worry about the speed getting reduced due to extra devices. No matter how many devices are joining the network, the speed will be constant.