How to Do Wavlink WiFi Extender Setup?
Performing Wavlink WiFi extender setup is one of the best methods to turn dead zones into fun zones. Are you looking for a step-by-step guide to do Wavlink repeater setup? Yes? Then, you have landed on the right page. Here, we will make you acquainted with various methods to do Wavlink setup. So, read on.
Wavlink WiFi Extender Setup Methods
There are two methods to perform Wavlink WiFi extender setup:
- Manual method
- WPS method
Moving on, let’s shed light on both methods to do Wavlink setup.
Wavlink WiFi Extender Setup via Manual Method
To do Wavlink WiFi extender setup via manual method, you need to access the default web address of the Wavlink extender i.e. http://ap.setup on a web browser. Walk through the below guidelines to learn how to do Wavlink repeater setup via manual method:
- To begin with, unbox your Wavlink WiFi range extender.
- Now, plug your Wavlink extender into the power socket and turn it on.
- Thereafter, grab an Ethernet cable and connect your Wavlink WiFi extender and router using it.
- Once done, switch on your computer and open a web browser.
- Go to the address bar and type http://ap.setup.
- Press the Enter key to gain access to the Wavlink WiFi extender login page.
- Once on the ap setup Wavlink page, select the language and enter the required details.
- Click Login.
- Thereafter, you will see a few prompts on the screen.
- Now, walk through the instructions thoroughly and complete the Wavlink WiFi extender setup process.
That’s how you can do Wavlink repeater setup via ap setup Wavlink. However, if you are unable to access http://ap.setup during the installation process, walk through the next section.
Can’t Access http://ap.setup During Wavlink Setup?
- Ensure that you are connected to a blazing-fast internet connection while accessing http://ap.setup for the Wavlink repeater setup process.
- Make sure that you are not entering the incorrect web address to reach the ap setup wavlink.
- Do not use the search bar of the web browser to type http://ap.setup and gain access to the Wavlink WiFi extender setup wizard.
- If the Ethernet cable connecting your Wavlink extender and the host router is worn out, consider replacing it with a new cable or use a wireless source to connect your WiFi devices.
- Place your Wavlink extender in close proximity to the host router. Once done, check if you are able to access http://ap.setup.
- Keep the extender away from microwave ovens, cellular phones, Bluetooth speakers, refrigerators, televisions, treadmills, mirrors, indoor waterfall walls, etc while accessing the ap setup Wavlink page.
- Bring your Wavlink range extender in an open space. However, avoid exposing it to direct sunlight.
- Check if an antivirus software is working in the background while you are trying to access http://ap.setup. If any, consider disabling it temporarily.
- Update the web browser you are currently using to gain access tp ap setup Wavlink page. If that fails to bear any fruit, switch to another web browser and try to access http://ap.setup again.
- Confirm with your ISP if he’s performing some maintenance from the back-end that is causing the internet connection problem.
By walking through the aforementioned troubleshooting tips, you will successfully be able to access http://ap.setup and complete the Wavlink setup process. On the off chance you still unable to access ap setup Wavlink, contact our experts for quick help.
Wavlink WiFi Extender Setup via WPS Method
You can also perform Wavlink setup using the WPS method. It means you need not get entangled in the mess of accessing the http://ap.setup web address. Read the below guidelines and get to know about Wavlink WiFi extender setup via WPS.
- Plug in your Wavlink WiFi range extender into a wall outlet near the host router.
- Switch on your Wavlink extender.
- Now, look for the WPS button and press it carefully.
- Wait for some time and press the WPS button on the host router.
- The Wavlink setup process is completed.
In this manner, you can perform Wavlink WiFi extender setup using the WPS method. However, if you are unable to complete the Wavlink setup process, it might be due to the following reasons.
Reasons Behind Wavlink WiFi Extender Setup Issues
- Insufficient power supply
- Improper distance between WiFi devices during the Wavlink repeater setup process
- Unstable Ethernet connection
- Outdated or cached web browser
- Inappropriate location of the Wavlink range extender
- Use of incorrect login credentials
- Incorrect web address
- Too much security on the device being used for Wavlink WiFi extender setup process
- Use of search bar to access http://ap.setup
- Carelessness while following on-screen prompts
Whatever the reason might be, following the tips discussed in the next section will help you overcome Wavlink setup issues.
Troubleshooting Wavlink WiFi Extender Setup Issues
- The insufficient power supply might be an outcome of a damaged wall socket. Therefore, first of all, check the wall socket into which you have plugged your Wavlink WiFi extender. In case it is damaged, then either get it repaired or use another wall socket to power up your WiFi extender.
- As mentioned earlier that the unsafe distance between your WiFi devices might also lead you to Wavlink repeater setup issues. Therefore, experts recommend to place the Wavlink extender and the host router at a safe distance. The term safe distance means neither too close nor too far.
- The Ethernet cable has a major role to play when it comes to accomplishing success with the Wavlink repeater setup process. That is why it is always advised to use a damage-free Ethernet cable. Using a damaged Ethernet cable can break the communication between your WiFi devices. Also, ensure that the connection is finger-tight.
- Most users commit the mistake of using an outdated version of the web browser to access http://ap.setup for the Wavlink setup process. Chances are that you have also followed the same path due to which you failed to reach ap setup Wavlink page. But, before you get involved in any other trouble, update the web browser you are using. Not only this, clear its cache, cookies, and browsing history by navigating to the Settings section.
- Did you consider the factors affecting the signals of your Wavlink extender while choosing its location? Probably not. The Wavlink extender broadcasts signals that are most likely to be affected by devices emitting electromagnetic frequencies, reflexive surfaces, and metal objects. Also, make sure that your extender is not placed in a corner or near a concrete wall during the Wavlink repeater setup process.
- To complete the Wavlink WiFi extender setup process, you need to reach its dashboard. However, it can’t be accessed without logging in to the extender. If the admin details used by you to log in to your WiFi extender are incorrect, then you won’t be able to get the Wavlink repeater setup success. Therefore, be careful while entering them and keep the Caps Lock key on the keyboard off. If you are not sure regarding the Wavlink extender admin details, ping our experts.
- Even though antivirus software installed on your PC prevents it from viruses and malware, they are equally responsible for creating a mess during the Wavlink setup process. Want to know how? Antivirus software halts access to numerous networking sites including http://ap.setup. Thus, we suggest you temporarily disable antivirus software installed on your PC to get the Wavlink WiFi extender setup success.
- The default web address of the extender acts as a gateway to perform Wavlink repeater setup. Therefore, it needs to be entered correctly in the address bar of the web browser. FYI, to gain access to the Wavlink setup wizard, the default web address is http://ap.setup. Also, avoid using the search bar of the web browser to access the ap setup Wavlink page. Use the address field instead.
- Well, this is the most common mistake made by Wavlink extender users during the installation process. Are you on the same list? Yes? You can’t act carelessly while following the on-screen instructions. You need to follow the on-screen prompts carefully to complete the Wavlink extender setup process.
- If you follow all of these troubleshooting hacks correctly, then you’ll surely get success with the Wavlink WiFi extender setup process via http://ap.setup. However, if you are still struggling to make your extender up and running, chances are that your device has fallen victim to technical glitches. In that case, we advise you to give a fresh start to your Wavlink extender. Here’s how you can reboot the Wavlink WiFi extender.
How to Reboot Wavlink Extender?
- Switch off your Wavlink range extender.
- Disconnect it from the power source.
- Wait for some time.
- Re-connect your Wavlink WiFi extender to the power source.
- Switch on your Wavlink extender.
As soon as you reboot your extender, try to perform Wavlink repeater setup and see if you can get success with the process. If not, then we recommend you reset your extender to the factory default mode. To know more about the reset process of the Wavlink WiFi extender, get in touch with our experts.
The moment your extender resets, you need to perform Wavlink repeater setup process from scratch. You can do it either by accessing the Wavlink WiFi extender setup wizard or by pushing the WPS button.