7 Tips to Fix Wavlink WiFi Extender Red Light Issue
Wavlink extenders are one of the most wonderful networking devices present in the market. They let you access a high-speed internet connection in every part of the house. However, this experience can be ruined if the extender starts flashing red. Are you also facing the Wavlink WiFi extender red light issue? If you are nodding your head in yes, then you have reached the right post. Here, you will learn 7 tips to fix the red light issue with the Wavlink range extender. So, read on.
How to Fix Wavlink Extender Red Light Issue?
Tip 1- Check Power Socket
The first and foremost reason why your Wavlink extender is flashing red might be due to technical glitches. Before these glitches make your extender non-functional, get rid of them. For this, give a fresh start to your Wavlink WiFi extender.
Below mentioned are the steps explaining the process to give a restart to your Wavlink range extender:
- Unplug your Wavlink range extender from the power socket after switching it off.
- Let the Wavlink extender rest for a while.
- Now, re-plug your Wavlink extender and switch it on.
Once you are done with the restarting process, check whether you have get rid of the Wavlink extender red light issue. If not, take the help of the next troubleshooting tip.
Tip 2- Avoid Overheating of Extender
Chances are that your Wavlink extender is overheating due to which it is flashing red. Therefore, consider preventing your Wavlink extender from getting overheated.
To avoid overheating of the Wavlink range extender, consider not exposing it to direct sunlight and keep the extender off when not in use. In addition, take care of the cleanliness of your Wavlink range extender by wiping off the dirt (if available) accumulated on its surface.
Tip 3- Bring WiFi Devices Closer
Is the distance between your Wavlink WiFi extender and the host router too much? Yes? Then, you have spotted another reason dragging you to the Wavlink extender red light issue. To rid yourself of the problem, consider reducing the distance between your WiFi devices to facilitate an effective communication. But, avoid placing them too close to prevent a clash of their WiFi signals.
Quick Tip: For the seamless communication between the Wavlink extender and the main router, you can use a wired source to connect them. However, the Ethernet cable must be non-damaged.
Tip 4- Remove WiFi Interference
Your Wavlink WiFi range extender might also be flashing the red light if its signals are getting interfered. Major causes of WiFi interference are microwave ovens, cellular phones, televisions, treadmills, refrigerators, mirrors, fish tanks, Bluetooth speakers, etc. So, keep your Wavlink range extender away from such things.
Apart from the aforementioned things, do not keep your Wavlink WiFi extender near metal objects, concrete walls, or in a corner. Try to keep the extender in the central location of your home. After relocation, check if the extender red light issue is still troubling you.
Tip 5- Update the Firmware
You might be well aware of the fact that the performance of your Wavlink range extender completely depends on its firmware. For efficient performance, one needs to regularly do Wavlink extender firmware update. But, it looks like you ignored updating the firmware and thus are facing the Wavlink extender red light issue as its outcome.
To get the problem resolved, perform Wavlink extender firmware update as soon as possible. In case you need an expert’s help while updating the Wavlink firmware, get in touch with our professionals.
Tip 6- Disconnect Extra Devices
Have you connected a hoard of WiFi-enabled devices to your Wavlink range extender? Yes? Well, know that connecting a number of client devices to the extender can also result in the red light issue.
Therefore, disconnect all the additional devices connected to your Wavlink extender. Now, see if you have got luck in resolving the Wavlink extender red light issue.
Tip 7- Reset the Wavlink WiFi Extender
If none of the above-mentioned troubleshooting techniques has worked in your favor so far, then there are high chances that your Wavlink device is improperly configured. Thus, you need to set it up properly. Prior to that, perform factory default reset of the extender.
Caution: Factory default reset will wipe out all the customized settings from the extender. So, it is advised to take the backup of the extender’s settings before resetting it.
The factory default reset process can be simply executed by pressing the Reset button on the Wavlink extender. As soon as you reset the extender, it will get restored to the factory default mode. Now, configure it from scratch.
Final Words
Did you get success in resolving the Wavlink extender red light issue? If yes, then we would like to congratulate you on resolving the issue. In case you are still troubled by the problem, reach out to our experts for instant help.